Triggers

Original CZ Target Trigger for the CZ 75, SP-01 and TS series. With slight offset for shooters with shorter fingers. Anodised black.

Original CZ Straight Target Trigger for the CZ 75, SP-01 and TS series. Anodised black.

Original CZ Flyweight trigger for the CZ 455. Adjustable from 105 to 510 grams pull. Seperate adjustment for first and second stage. First stage can also be elimenated.

Timney 2-Stage trigger for the Remington 700, 721 and 722 series. The pull weight is factory calibrated for a eight-ounce first stage and one -pound second stage (the second stage is adjustable from 8-ounces to 2.5-pounds of pull weight). The 2-Stage trigger features machined and hardened steel work surfaces milled from A2 tool steel and all three sears are Teflon-nickel coated for added lubricity. The trigger housing and shoe are CNC machined using state-of-the-art robotics and the sears are EDM cut from high-grade solid steel.  The trigger housing utilizes an anodized aluminum body and the trigger shoe and safety are carbonitrided which dramatically increases the surface hardness and wear-resistance properties of the metal. The Timney 2 Stage Straight Trigger is easily installed with no screws, drilling, or tapping required. By simply removing existing pins, replacing trigger, and inserting existing pins anyone can replace a trigger on their Remington 700.

Timney Matchgrade Trigger for the Remington 700, 721 and 722 series. This very light trigger was created for the Bench-rest and long distance varmint shooters. With a knurled trigger bar, it is adjustable for length of pull. It can also be rotated from side to side to put fire control right where you decide. Adjustable from 4 to 10 ounces. The model 501t will not accept a safety.

Timney Calvin Elite Custom Trigger for the Remington 700, 721 and 722 series. Adjustable from 8 oz up to 2 Lb in pullweight. Comes with three exchangable (red) triggershoes. By simply removing existing pins, replacing trigger, and inserting existing pins anyone can replace a trigger on their Remington 700.

Timney Elite Hunter 3lbs Replacement Trigger for the Remington 700, 721 and 722 series. It comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. This trigger upgrade will bring a whole new realm of accuracy to your Remington rifle. The Timney trigger is made from a solid block of heat treated steel; there's no 'connector bar' to come loose.

Timney replacement trigger for the CZ 452 .22LR. Adjustable from 2- 3.5lbs. The sear engagement is also adjustable and the over-travel is mechanically limited. Each trigger is calibrated to approximately 2lb., with virtually no creep. Stock inletting required.

Timney replacement trigger for the CZ 455. Adjustable from 2- 3.5lbs. The sear engagement is also adjustable and the over-travel is mechanically limited. Each trigger is calibrated to approximately 2lb., with virtually no creep. Stock inletting required.

Timney replacement trigger for the CZ 550. Adjustable from 1.8 - 3.5lbs. The sear engagement is also adjustable and the over-travel is mechanically limited. Each trigger is calibrated to approximately 2lb., with virtually no creep. Stock inletting required sometimes.

Timney Replacement Trigger for the Howa 1500, Weatherby Vanguard, Mossberg 1500 and Smith & Wesson 1500 actions. It also fits the Weatherby Vanguard Series II. Triggerpull adjustable from 1.5 to 4 pounds.

Timney Featherweight Trigger for the Mauser M98 FN, including the 98 and 98K. Timney Featherweight Triggers are precision machined and hand-fitted to provide a crisp trigger pull. They feature a lightweight alloy housing with machined and hardened steel working surfaces. The trigger is fully adjustable. The triger pull weight is adjustable from 1.5 to 4lbs. and is adjustable for creep and overtravel. Minor fitting may be required.

Timney Replacement Trigger for the Remington 700, 721 and 722 series. It comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. This trigger upgrade will bring a whole new realm of accuracy to your Remington rifle. Each trigger is geometrically identical with tolerances less than .0005”. adjustable from 1.5 to 4 lbs. The Timney trigger is made from a solid block of heat treated steel; there's no 'connector bar' to come loose.

Timney 2-Stage replacement trigger for the Ruger Precision Rimfire. Adjustable from 8oz - 2lbs. Available with a straight or a curved trigger.

Timney Replacement Trigger for the Savage Axis and Edge. Machined from case-hardened solid steel and is fully adjustable for pull weight, sear engagement (creep) and over-travel. The trigger's pull weight can be adjusted from 1.5 - 4 pounds.

This Glock Worx Fulcrum is the finest trigger available for the Glock .45 GAP! Complete drop in installation requires no special tools, or the services of a gunsmith. The CNC Billet Aluminum trigger pad has an ergonomic shape with a wide flat face that is ideal for shooting with the pad of your trigger finger as opposed to the rounded face of the factory trigger. The trigger safety of the Fulcrum is 3x wider and more flush when depressed. The trigger safety also features a real spring as opposed to the thin plastic nubbin of the factory safety for greater heat and chemical resistance. The Fulcrum trigger features adjustment screws for PRE and OVER travel. Range of trigger movement can be shortened to ¼” overall, with all factory safeties intact. Trigger reset has been shortened by half so that pistol can fire mechanically faster. The trigger bar is high polished and precision ground to help eliminate trigger creep and allow the trigger to stack up and break consistently.

This Glock Worx Fulcrum is the finest trigger available for the Glock in 10mm and .45 ! Complete drop in installation requires no special tools, or the services of a gunsmith. The CNC Billet Aluminum trigger pad has an ergonomic shape with a wide flat face that is ideal for shooting with the pad of your trigger finger as opposed to the rounded face of the factory trigger. The trigger safety of the Fulcrum is 3x wider and more flush when depressed. The trigger safety also features a real spring as opposed to the thin plastic nubbin of the factory safety for greater heat and chemical resistance. The Fulcrum trigger features adjustment screws for PRE and OVER travel. Range of trigger movement can be shortened to ¼” overall, with all factory safeties intact. Trigger reset has been shortened by half so that pistol can fire mechanically faster. The trigger bar is high polished and precision ground to help eliminate trigger creep and allow the trigger to stack up and break consistently.

This Glock Worx Fulcrum is the finest trigger available for the Glock 36 ! Complete drop in installation requires no special tools, or the services of a gunsmith. The CNC Billet Aluminum trigger pad has an ergonomic shape with a wide flat face that is ideal for shooting with the pad of your trigger finger as opposed to the rounded face of the factory trigger. The trigger safety of the Fulcrum is 3x wider and more flush when depressed. The trigger safety also features a real spring as opposed to the thin plastic nubbin of the factory safety for greater heat and chemical resistance. The Fulcrum trigger features adjustment screws for PRE and OVER travel. Range of trigger movement can be shortened to ¼” overall, with all factory safeties intact. Trigger reset has been shortened by half so that pistol can fire mechanically faster. The trigger bar is high polished and precision ground to help eliminate trigger creep and allow the trigger to stack up and break consistently.