Gun Cases & Hard Cases

Nimrod Guncase 100x35x14cm

Nimrod Kunststof Wapenkoffer voorzien van plukfoam en noppenschuim (deksel) met externe afmetingen van 100x35x14cm. De interne afmetingen bedragen 93,5x29,5x9,5cm. De diepe kant is voorzien van plukschuim en het deksel is aan de binnenkant van noppenschuim voorzien. Met 7 sluitingen een gegarandeerde goede afdichting en middels een over- cq onderdrukventiel kan de koffer nooit vacuum opbouwen bij drukverschillen. Eenvoudig te dragen of rollen. Een goede stevige koffer voor een mooie prijs.

Vanguard Classic Rifle Case 48"

Vanguard Classic 62CL Rifle Case for one rifle incl. scope. Exteriorsize 48x9x4,5". Equiped with 4 locks, 4 hinges and a handle. Very solid case with an aluminium frame for protecting your firearm during transport.

Rifle Hard Case 52x13x5"

Solid Rifle Hard Case with carryhandles and wheels. Interior with double layered foam.

Features:
– IP67 Dust & Water Protection
– Durable Foam
– 4 easy closing latches to keep it shut.
– Wheels on the bottom with a handle at the top.
– Side handle to carry by hand.
– Inner padding to hold the contents secure and protected.
– 2 Padlock holes on front edge.
– Available in 4 colours: Black, Tan, Green, Grey
– External Size: 53.9x15.3x5.9 inch
– Internal Size: 51.1*12.59*4.92 inch
– Weight: 3kg

K&M Large Pistol Case

King & More Aluminium Pistol Case. With 2 solid locks, leather look handle and a high grade hinge. Soft foam interior. Made in Texas/USA. Easily fits 2 pistols or revolvers.

Length : 16”
Width : 7 1/4”
Height : 3,5”

SKB ATA300 Single Rifle Case

The 2SKB-4900 ATA Single Rifle Case is made to ATA 300 Category 1 Specifications, which is the highest shipping container specification of the ATA. This compact, stylish case is molded from ultra-high density molecular weight polyethylene, the material specified by the U.S. military for cases and containers.

Capable of accommodating a rifle up to 48", the 2SKB-4900 features SKB's unique Perfect Match Valance Bending System for a perfect seal. Weather resistant, stackable, stainless steel D-Rings for carry strap, (strap not included), bumper protected hardware and updated with patented nylon trigger release latches with locks.

An Unconditional Lifetime Warranty backs the 2SKB-4900 Single Rifle Case.

All SKB ATA Hunting Cases also offer a special $1500 Content Guarantee. In the unlikely event that your rifle is damaged by airline handling while transported in a 2SKB-4900 ATA Single Rifle Case, SKB will repair or replace your rifle up to $1500.

Made in USA

SKB iSeries Single Rifle Case

SKB 3i-4909-SR Single Rifle case for scoped rifles up to 49" long and is part of the iSeries waterproof case line. The interior is made of high quality EPS and ELE convolute foam to ensure a proper compression and protection for your firearm. Lifetime Warranty.

The 4909-SR Injection Molded Watertight Single Rifle Case has four (4) SKB patented trigger latches, four reinforced padlock locations that will accommodate a customer supplied lock, the perfect solution for protecting and transporting your rifle. This new Single Rifle Case is also available in 3i-4909-SR-T Tan or 3i-4909-SR-M Military Green and is made in the USA.
 Available in 3 colors.
 

Interior Dimensions: 49.00" L x 9.00" W x 4.50" D

iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature gasketed, waterproof and dustproof submersible design (IP67) that is resistant to corrosion and impact damage. The patented "trigger release" latch system, comfortable snap down rubber over-molded cushion grip handle, secure stacking and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design. Made in the USA.

SKB iSeries Tactical Rifle Case 36"

The SKB iSeries 3614 Tactical Rifle Case is an injection molded watertight case with wheels that features high-density foam interior and is perfect for shorter, tactical, assault type rifles.
 

Interior Dimensions: 36.50" L x 14.50" W x 6.00" D

All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

Nanuk 935 Ammo Case

The NANUK 935 ammo case has no foam and will transport all your ammo without problems. Simply pull along using the sturdy poly wheels. Steel reinforced padlockopenings are included.
 

• Interior dimensions (L x W x H): 20.5″ x 11.3″ x 7.5″
• Exterior dimensions (L x W x H): 22.0″ x 14.0″ x 9.0″
• Material: Lightweight NK-7 resin
• Waterproof (IP67): Yes
• Warranty: Conditional lifetime guarantee
• Airline check-in: Yes
• Airline cabin carry-on: Yes

 

 

 

SKB iSeries Mil-Spec AR / Short Rifle Case

SKB iSeries 4217 AR/Short Rifle Case comes equipped with four reinforced padlock locations, cushioned snap-down handles on three (3) sides and recessed, in-line skate style wheels. The interior features a layered foam base and convoluted foam in the lid for secure positioning and cushioning of your gear. Available in 3 colors.
 

Interior Dimensions: 42.50" L x 17.00" W x 7.50" D

Lifetime Warranty.

iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature gasketed, waterproof and dustproof submersible design (IP67) that is resistant to corrosion and impact damage. The patented "trigger release" latch system, comfortable snap down rubber over-molded cushion grip handle, secure stacking and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design. Made in the USA.

Nanuk 990 Long Rifle Case

The NANUK 990 long rifle case has been designed by enthusiasts for enthusiasts featuring details that even the most demanding marksmen will appreciate. Engineered to fit one rifle up to 100cm. Equipped with 4 locking latches and polyurethane wheels, the 990 rifle case will protect and transport your rifle(s) in complete security.
 

• Interior dimensions (L x W x H): 44.0″ x 14.5″ x 6.0″
• Exterior dimensions (L x W x H): 47.1″ x 17.3″ x 6.6″
• Material: Lightweight NK-7 resin
• Waterproof (IP67): Yes
• Warranty: Conditional lifetime guarantee
• Airline check-in: Yes
• Airline cabin carry-on: No

 

 

 

Nanuk 985 AR15 Rifle Case

The NANUK 985 AR15 rifle case has been designed by enthusiasts for enthusiasts featuring details that even the most demanding marksmen will appreciate. Engineered to fit a standard 36” AR 15 along with space for up to 8 magazines, the foam insert also features storage areas to accommodate popular accessories and two dedicated slots for desiccant cannisters. Equipped with two TSA accepted locking latches and polyurethane wheels, the 985 AR case will protect and transport your rifle in complete security.

• Interior dimensions (L x W x H): 36.63″ x 14.5″ x 6.0″
• Exterior dimensions (L x W x H): 39.75" x 17.31" x 6.63"
• Material: Lightweight NK-7 resin
• Waterproof (IP67): Yes
• Warranty: Conditional lifetime guarantee
• Airline check-in: Yes
• Airline cabin carry-on: No

Nanuk 995 Long Rifle Case

The NANUK 995 long rifle case has been designed by enthusiasts for enthusiasts featuring details that even the most demanding marksmen will appreciate. Engineered to fit one or two long rifles. Equipped with 4 locking latches and polyurethane wheels, the 995 rifle case will protect and transport your rifle(s) in complete security.
 

• Interior dimensions (L x W x H): 52.0 x 14.5” x 6.0″
• Exterior dimensions (L x W x H): 55.1″ x 17.3″ x 6.6″
• Material: Lightweight NK-7 resin
• Waterproof (IP67): Yes
• Warranty: Conditional lifetime guarantee
• Airline check-in: Yes
• Airline cabin carry-on: No